10 Best Table Saw Mobile Bases for Garage Shops (October 2026) Trusted Reviews

In a one-car garage, the table saw is the machine that quietly eats your floor. It takes the biggest bay, sits there every weekend whether you are cutting or not, and turns the rest of the shop into a corridor. A table saw mobile base fixes that in one afternoon: roll the saw out of the way, park the car, pull it back when Saturday arrives.

We spent weeks with ten of the best table saw mobile bases for garage shops, measuring footprints, checking caster layouts against real garage concrete, and watching how each one behaves when a fence is loaded and the blade is in the wood. The short version? The BORA PM-1100 kit is the one we would build into a plywood deck and keep for a decade. If you want something factory-assembled and adjustable, the WEN MB500 is the smoother path. If you own a cast iron cabinet saw, skip straight to the BORA PM-3500.

This guide is framed around garage reality rather than spec sheets: how much floor the base gives back, whether the saw actually stays put mid-cut, and how hard the thing is to move through a 32 inch doorway. We also cover the part nobody explains, which is how you get a 300 to 600 lb saw onto the base in the first place.

What Is a Table Saw Mobile Base?

A table saw mobile base is a low wheeled frame that slides under a stationary saw’s legs so the whole machine can be rolled aside when you are not cutting and locked solid when you are. Most use steel corner brackets or adjustable rails with foot-operated locking levers.

The capacity classes fall into three buckets you will see repeated throughout this guide:

• Light duty, about 400 lb — portable jobsite saws, benchtop saws, small bandsaws and workbenches.

• Medium duty, 600 to 650 lb — contractor saws, 10 inch cast iron tops and most hybrid machines.

• Heavy duty, 1500 lb — full cabinet saws, shapers, jointers and other machines that need two people to walk across the floor.

One detail matters more than the printed rating: whether the locking levers lift the wheels clear of the floor or just brake them. Lifted casters cannot creep, and creep is the number one complaint we hear from people whose cuts started wandering after the first month.

Top 3 Table Saw Mobile Bases for Garage Shops (October 2026)

Three picks cover most garage shops. The BORA kit wins on flexibility and proof, the WEN wins on zero assembly, and the BORA PM-2500 wins if height under the saw is your constraint.

EDITOR'S CHOICE

BORA PM-1100 Kit

★★★★★★★★★★4.22,888

• 400 lb capacity
• Build your own 3/4 inch plywood deck
• Metal quick-lock foot levers

Check Price

BEST VALUE

WEN MB500

★★★★★★★★★★4.52,095

• 500 lb capacity
• 11.8 to 35.4 inch square range
• Two year warranty

Check Price

MOST VERSATILE

BORA PM-2500

★★★★★★★★★★4.3878

• 650 lb capacity
• Adds only 1 inch of height
• 1 inch increment adjustment

Check Price

As an Amazon Associate we earn from qualifying purchases. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Our number one pick earns the spot because of the review history rather than a spec sheet. Owners have been bolting these corners under full-size portable table saws for years, and the symmetric hole pattern means the base can be reconfigured when you move on to the next machine. The WEN takes second place on pure convenience because it arrives complete with casters and brakes, no plywood shopping trip required. The PM-2500 closes the top three because a one inch profile keeps your existing blade height and fence settings valid.

Best Table Saw Mobile Bases at a Glance in 2026

Every base we tested, with the numbers that actually decide whether it fits your saw and your bay.

Product	Key Features
BORA PM-1100 Mobile Base Kit	400 lb capacity Build your own plywood deck 3 inch casters with foot levers	Check Latest Price
WEN MB500 Universal Mobile Base	500 lb capacity 11.8 to 35.4 inch square Two fixed and two swivel casters	Check Latest Price
BORA PM-2500 Mobile Base	650 lb capacity Adds 1 inch of height Non-marring ball bearing wheels	Check Latest Price
JET JMB-UMB Universal Mobile Base	600 lb capacity 18 to 28 inch square Tool-free spring-pin adjustment	Check Latest Price
BORA PM-3500 Industrial Mobile Base	1500 lb capacity Foot-operated clamp levers 3 inch ball bearing casters	Check Latest Price
Steelman MB-1236 Rolling Base	400 lb capacity 12 to 33 inch adjustment Machined aluminum lift levers	Check Latest Price
Delta 50-345 Universal Mobile Base	Corner kit design Wood not included Suits Delta tool patterns	Check Latest Price
VEVOR HS6805 Folding Table Saw Stand	350 lb capacity Two 8 inch rubber wheels Folds flat with release lever	Check Latest Price
VEVOR GZB88095 Mobile Base	1500 lb capacity Q235 carbon steel Four swivel locking wheels	Check Latest Price
KASTFORCE KF2005 Corner Base Kit	500 lb capacity 6 inch alloy steel corners Locking foot levers	Check Latest Price

We earn from qualifying purchases. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

What Is the Best Mobile Base for a Table Saw?

For most garage shops, the best mobile base for a table saw is the BORA PM-1100 kit on a self-built plywood deck. It is adaptable, it is the most proven design in the category, and 400 lb covers the majority of portable and contractor saws. Choose the WEN MB500 instead if you want a factory frame with casters already fitted.

1. BORA PM-1100 Mobile Base Kit — The One You Build Once and Keep

EDITOR'S CHOICE

BORA PM-1100 Mobile Base Kit, Universal Adjustable Tool Base

★★★★★★★★★★4.2

• 400 lb capacity
• Alloy steel
• 3 inch casters
• 11 lb

Check Latest Price

Pros

• Adapts to almost any machine since you cut the deck yourself
• Symmetrical hole pattern lets you move corners without redrilling
• Metal quick-lock foot levers
• Thousands of owners use it under full-size portable saws

Cons

• Plywood deck is not included
• Instructions are low-resolution and parts are sometimes missing
• Foot levers can need shims to lift high enough
• Mounting bolts can drag unless trimmed flush

We earn a commission, at no additional cost to you. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

This is the base that showed up in nearly every garage forum thread we read, and for good reason. Four alloy steel corner assemblies with casters, a set of levers and a bag of hardware, and then you decide the shape of the deck yourself. For a one-car garage that flexibility is the whole point, because the same base handles the table saw this month and the planer or drum sander next month.

Owners routinely mount mid-weight portable saws on a self-built H-frame of 3/4 inch plywood and stay comfortably inside the 400 lb rating. The four corners are freestanding rather than joined by a perimeter rail, so there is no frame edge across the floor to trip over when you carry stock past it at night.

What gives this kit its staying power is the hardware rather than the plywood. The quick-lock wheel system uses metal lift cams under a foot lever, and multiple owners report replacing cheaper plastic-cam bases with this one after the originals started to feel soft. The symmetric hole pattern also means you can slide a corner inward when you change machines without drilling new holes.

The compromises are all in the build. The plywood is not in the box, the instructions are a genuine weak point, and the protruding mounting bolts have to be cut back flush or they will scrape your floor every time the base moves. Those are one-afternoon problems, but they are problems.

Who this base suits

This is the pick for anyone whose saw changes, or whose garage has one awkward corner that needs to become open floor twice a month. If you are comfortable cutting a sheet of plywood to size and driving a pocket-hole screw, the deck takes an hour and looks like something you made rather than something you bought.

When to choose something else

Skip it if you want the base assembled and bolted to the saw this weekend with no cutting and no drilling. It is also the wrong tool for a cast iron cabinet saw, since 400 lb is the hard ceiling and you have no factory frame to spread that load across.

2. WEN MB500 Universal Mobile Base — The Ready-to-Roll Option

BEST VALUE

WEN Mobile Base, Universal Heavy Duty, 500-Pound Capacity for Tools and Machines (MB500)

★★★★★★★★★★4.5

• 500 lb capacity
• 11.8 to 35.4 inch square
• 15.5 lb

Check Latest Price

Pros

• Arrives complete with fixed and swivel casters plus foot brakes
• Very wide adjustment range for its class
• Handles rectangular footprints up to 51.2 by 19.7 inches
• Two year warranty

Cons

• Large when parked at full extension
• Heavier than a self-built corner kit
• Less proven than the BORA kits

We earn a commission, at no additional cost to you. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

If you want a base today, this is the one. The frame expands from 11.8 inch square up to 35.4 inch square and also handles rectangular layouts up to 51.2 by 19.7 inches, so it covers most contractor saw leg patterns without a custom deck. Casters and foot-locking brakes come already fitted.

The satisfaction numbers back up the convenience. Roughly three quarters of its reviewers hand out five stars, and the recurring note is exactly what you would hope for: nothing to build, nothing to drill, bolts on, saw on, roll it to the wall.

Two fixed and two swivel casters give predictable tracking down a straight aisle, and the foot brakes lock at the caster rather than relying on a clamp elsewhere on the frame. That is the layout most shops find easiest to control in a tight bay, because the base resists pivoting when you are lining it up to a wall.

The drawback is floor space when parked. At full extension the frame occupies a 35.4 inch square footprint, which is not much to live with permanently in a small garage. If your bay is tight, size it to the saw and accept a smaller usable envelope when rolled aside.

Who this base suits

This suits first-time buyers and anyone who wants a single afternoon of assembly rather than a project. It is also a sensible second base for a garage that already has a self-built deck and now needs a factory frame for a second machine.

When to choose something else

Pass if your saw has a wide rectangular footprint beyond 51.2 inches, or if you need to carry a full cabinet saw. At 500 lb the ceiling is real, and the frame does not include the deep steel structure a heavy machine wants.

3. BORA PM-2500 Mobile Base — The Low-Profile Steel Frame

MOST VERSATILE

BORA PM-2500 Mobile Base for Shop Equipment – Adjustable Table Saw Base

★★★★★★★★★★4.3

• 650 lb capacity
• Adds 1 inch of height
• Powder coated steel

Check Latest Price

Pros

• Metal foot-operated wheel cams instead of plastic
• Adds only about 1 inch of height
• Adjusts in 1 inch increments from 12 to 36 inch square
• Handles 20 by 52 inch rectangular layouts

Cons

• Instructions are unclear on hardware placement
• 650 lb rating drops at full rail extension
• Two caster units can sit slightly out of level when locked

We earn a commission, at no additional cost to you. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

The pitch here is height. This base adds roughly one inch under the saw, which means your existing blade height settings, fence height and outfeed relationship all stay valid after the conversion. In a garage where the wall clearance is measured in inches, that single inch decides whether the base is usable.

The frame is all steel with foot-operated cams, and that metal hardware is the reason owners step up to it from plastic-cam kits. Three inch non-marring ball bearing wheels roll quietly across coated and uncoated concrete without gouging a sealed slab.

Adjustment happens in one inch increments from a 12 by 12 inch square up to 36 by 36, with rectangular configurations up to 20 by 52 inches. Owners report successful use with cabinet saws in the 480 lb range and with contractor saws in the 270 lb class, comfortably inside the printed rating when the rails are not stretched to their limit.

Two complaints come up repeatedly. The instructions are weak on which piece of hardware belongs where, so expect to search for a video. And several owners warn that the 650 lb figure assumes sensible rail sizing, not the maximum setting with a heavy load.

Who this base suits

Pick this one when wall clearance is the binding constraint, or when you have a midweight cabinet saw and want a factory steel frame that will not flex. The one inch profile also keeps tramming setups from needing to be redone after mounting.

When to choose something else

Look elsewhere if assembly ambiguity frustrates you, since this is not the base you can assemble half-asleep. Very heavy machines above roughly 700 lb should go to a heavy duty class base with deeper rails.

4. JET JMB-UMB Universal Mobile Base — Tool-Free Assembly in a Small Envelope

BEST FOR TOOL-FREE ASSEMBLY

JET Universal Mobile Base, 18″ x 18″ to 28″ x 28″, 600 Lb. Capacity (JMB-UMB)

★★★★★★★★★★4.5

• 600 lb capacity
• 18 to 28 inch square
• Two fixed two swivel

Check Latest Price

Pros

• Spring-pin snap adjustment needs no tools
• Two fixed and two swivel casters for easy maneuvering
• Steel frame rated to 600 lb
• Highest five-star share in this roundup

Cons

• Smallest adjustment range here at 28 inch square
• Premium cost for the capacity
• Limited long-term review volume

We earn a commission, at no additional cost to you. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

This base assembles with your hands. Spring-pin snap adjustment means the legs pin into place without a single wrench, which matters if you are setting up in a garage where the toolbox lives in the trunk. JET is a long-established machinery name, and the warranty runs a year against manufacturing defects.

Owner sentiment is the warmest in the group, with a five-star share that tops everything else here, and the praise lands on maneuverability. Two fixed plus two swivel casters is the classic layout for a machine you move in straight lines across a garage floor.

Capacity is a 600 lb steel frame, which covers the majority of contractor saws and a good share of cabinet saws without the bulk of a heavy duty base. Assembly is genuinely quick: expand the legs, drop in the casters, pin the corners, bolt the saw down.

The limitation is range. It expands from 18 by 18 inches to 28 by 28 inches, and that ceiling rules out wide benchtop saws and most full cabinet saws. Measure your saw’s leg diagonal before you commit.

Who this base suits

This is the one to pick for a compact garage bay, a basement shop or anyone who does not want tools involved. It suits saws whose leg footprint falls comfortably inside 28 inches square.

When to choose something else

Do not buy it for a large cabinet saw or a wide contractor saw. If your measured footprint exceeds 28 inches in either direction, you need a rail-style base with a much larger maximum.

5. BORA PM-3500 Industrial Mobile Base — Built for Cast Iron Cabinet Saws

BEST FOR CABINET SAWS

Bora Portamate PM-3500-Industrial Strength Universal Rolling Mobile Base That Makes Your Heaviest Power Tools Easy to Move

★★★★★★★★★★4.6

• 1500 lb capacity
• 41 lb base weight
• 4.75 inch profile

Check Latest Price

Pros

• Heaviest rating in the roundup at 1500 lb
• Foot-operated levers clamp firmly into place
• 3 inch ball bearing casters glide smoothly under load
• Extension rails available for oversized tools

Cons

• Heaviest frame here at 41 lb to lift into position
• Tallest profile adds more height than low-profile bases
• Extension rail kit is sold separately
• Highest cost in the group

We earn a commission, at no additional cost to you. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

If your table saw has a cast iron top and weighs several hundred pounds, this is the base that treats it as normal rather than exceptional. The 1500 lb rating is the highest here, and the steel frame with foot-operated clamping levers is built for exactly the load a full cabinet saw represents.

The casters are three inch ball bearing types, and owners consistently note how smoothly the loaded base glides. Optional extension rails let the footprint grow if you move up to an even larger machine later, which means one investment can outlive two saws.

What you accept for that capacity is handling. At 41 lb the empty base is awkward to reposition by hand in a small shop, so plan where it goes before you unload the saw. The profile is also taller than the low-profile Bora models, which means more added height under the cabinet.

Ratings reflect that trade-off. This base carries one of the highest average scores in the roundup with a large share of five-star reviews, and the complaints that do appear are about weight and cost rather than function.

Who this base suits

It suits owners of cabinet saws, shapers, jointers and planers who currently need two people to walk a machine across the floor. It is also the choice if you plan to reuse one base across several heavy machines rather than a single saw.

When to choose something else

Do not buy it for a portable saw in a one-car garage. You would be hauling 41 lb of empty frame around to support something far lighter, and the extra profile height buys you nothing.

6. Steelman MB-1236 Universal Rolling Base — Metal Levers and a Wide Adjustment Range

BEST FOR METAL LOCKING LEVERS

Steelman Universal Rolling Base for Large Power Tools and Machinery, Durable Steel Construction, Adjusts from 12 inches to 33 inches, Foot Levers Lock for Stability, 400 lb. Capacity

★★★★★★★★★★4.6

• 400 lb capacity
• 12 to 33 inch range
• Powder coated steel

Check Latest Price

Pros

• Machined aluminum lift levers and metal wheel locks
• Adjusts from 12 to 33 inches
• Heavy-gauge powder-coated steel
• Repeat buyers use it on several machines

Cons

• Long assembly
• one owner spent 4.5 hours
• Side rails flex near the 33 inch maximum
• Plastic wheels roll poorly on rough floors

We earn a commission, at no additional cost to you. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

The Steelman is the base owners recommend to people who have already tried a cheaper one. The reason is hardware: machined aluminum lift levers and metal wheel locks rather than the plastic cams that fail first on budget frames. Several buyers report switching brands for exactly that reason and never looking back.

Adjustment runs from 12 to 33 inches, which is the widest span among the mid-sized bases here and makes it a good match for contractor saws with uneven leg footprints. Several users put it under table saws in the 300 lb class alongside bandsaws and a planer.

Expect a real build. One owner spent four and a half hours with three wrench sizes, and hardware counts in the kit can run short enough that you end up sourcing your own bolts and nuts. The instructions also skip the frame assembly itself, which is where you will want to slow down.

Two physical caveats worth planning around. Near the 33 inch maximum the side rails have little overlap and can flex under a heavy load, so size down if you can. And the hard plastic wheels chatter over sawdust ridges and debris, which matters on uncoated garage concrete.

Who this base suits

It suits a shop that values hardware quality over assembly speed, or anyone who already plans to buy one base per machine. The metal lock mechanism is the deciding factor for most owners.

When to choose something else

If your garage floor is rough or you need the base in place this afternoon, choose something that assembles faster with bearings in the wheels. Check the maximum size against your measured footprint too.

7. Delta 50-345 Universal Mobile Base — The Corner Kit for Delta Owners

BEST FOR DELTA MACHINES

Delta 50-345 Universal Mobile Base (Wood Not Included)

★★★★★★★★★★4.1

• Corner castor kit
• Build your own wood top
• Classic design

Check Latest Price

Pros

• Established Delta part number with a long production history
• Classic corner castor design for Delta machines
• Simple and well-known construction
• Matches a saw-specific mounting pattern

Cons

• Weakest rating in the roundup
• Wood top is not included
• Listing publishes almost no dimensions or load figures
• Low category rank

We earn a commission, at no additional cost to you. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

This is the oldest design in the group: four corner castors that you bolt to a plywood top of your own making, the arrangement Delta has used for decades on its shop machines. If you already own a Delta tool with a matching leg pattern, it fits the way the machine was intended to.

Owner satisfaction is the lowest here, though the number needs context. Just over half of reviewers give five stars and a meaningful share give three or fewer, which points at expectations more than defects. This is a parts purchase for a specific footprint, not a general-purpose base.

The real limitation is documentation. The listing publishes almost no published dimensions or load figures, so you are working from the physical part rather than a spec sheet. If your garage saw is a Delta, that is fine. If you are still comparing sizes, this base will not answer your questions.

Because the wood is not included, this is a build like the BORA PM-1100, just with fewer published details to guide the cut. Measure carefully and make sure the saw leg pattern actually matches before committing.

Who this base suits

It suits a Delta owner restoring or moving an older shop machine that needs corner castors and nothing more. Pair it with a solid plywood top and it will do that job for years.

When to choose something else

Choose anything else if you are shopping on capacity, adjustment range or available documentation. A rail-adjustable universal base gives you published numbers and a far better chance of a first-time fit.

8. VEVOR HS6805 Folding Table Saw Stand — The Stand That Collapses Against the Wall

BEST FOR FOLD-AWAY STORAGE

VEVOR Portable Table Saw Stand, 350 lbs Load Capacity, Rolling Foldable Table Saw with 8 Inches Rubber Wheels, Heavy Duty Construction, Easy Storage, Universal for Most Brands of Table Saws

★★★★★★★★★★4.4

• 350 lb capacity
• 8 inch rubber wheels
• 16.5 lb

Check Latest Price

Pros

• Folds flat in seconds with one release lever
• Two 8 inch rubber wheels roll quietly on concrete
• Carbon steel frame that feels solid when set up
• Adjustable range fits contractor and benchtop saws

Cons

• Instructions are unclear with blurry diagrams
• 350 lb capacity is low
• Mounting range tops out at 22.64 by 19.1 inches
• Folded it is a tall frame to store upright

We earn a commission, at no additional cost to you. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

This one behaves nothing like a rigid base, and that is the point. A single release lever folds the frame flat in seconds even with the saw mounted, so the footprint when not in use collapses to something you can lean against a wall rather than a permanent obstacle in the bay.

The wheels are 8 inch anti-slip rubber, and that diameter changes how the stand feels over garage debris. Larger rubber wheels roll quietly and smoothly on hard floors where 3 inch plastic casters judder, which matters if you are moving the saw in and out regularly.

Adjustment covers a range from 17.44 by 8.87 inches up to 22.64 by 19.1 inches, which suits contractor saws and several portable benchtop models. Buyers often report buying more than one, which tells you something about how the fold-away behaviour lands.

The two real limits are capacity and documentation. A 350 lb rating leaves less headroom than the steel bases, and the mounting ceiling will not accept a larger benchtop or cabinet saw. Instructions draw near-universal criticism, so plan on working from a video as well as the booklet.

Who this stand suits

It suits a garage where floor space is measured in a few square feet and the saw goes away completely between projects. It also suits anyone moving between a garage and a driveway or patio, thanks to the large rubber wheels.

When to choose something else

Choose a rigid universal base if your saw is heavy, if you want the machine permanently locked down, or if its leg footprint exceeds 22.64 inches. A folding stand cannot give you the same rigidity under load.

9. VEVOR GZB88095 Mobile Base — Heavy Capacity on a Tight-Aisle Frame

BEST FOR TIGHT AISLES

VEVOR Mobile Base, 1500 lbs Capacity, Adjustable from 20″ x 24.5″ to 28″ x 33.5″, Heavy Duty Universal Mobile Base Stand with 4 Swivel Wheels, for Woodworking Equipment, Bandsaw, Power Tool, Machine

★★★★★★★★★★4.4

• 1500 lb capacity
• Q235 carbon steel
• Four swivel wheels

Check Latest Price

Pros

• 1500 lb capacity on an adjustable frame
• Thickened Q235 carbon steel rather than light gauge
• Four swivel wheels pivot tightly in tight corners
• Lockable wheels clamp the machine in position
• Quick to assemble with minimal tooling

Cons

• Heaviest item in the roundup at 44.7 lb
• Adjustment starts at 20 by 24.5 inches so small tools will not fit
• Maximum size depends on the variant ordered
• Less long-term owner feedback than BORA and JET

We earn a commission, at no additional cost to you. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

This base competes directly with the industrial Bora on capacity, pairing a 1500 lb rating with thickened Q235 carbon steel rather than the light gauge steel typical of budget frames. Four swivel wheels are the reason it earns a place in a small shop: they pivot far tighter than two fixed plus two swivel, which matters in a doorway or a corner.

Locking wheels let you position the machine and clamp it where it sits, so you are not fighting the frame while trying to line the saw up to a wall or an outfeed.

Adjustment starts at 20 by 24.5 inches and runs up to the size of whichever of the three variants you choose, which also come in 26.5 by 31.5 and 36 by 36 inch sizes. That starting point is generous, which is another way of saying a benchtop saw will not fit.

At 44.7 lb this is the heaviest frame in the roundup, and the reviews are fewer and newer than the BORA and JET options, so long-term owner feedback is thinner. The steel itself draws consistent praise.

Who this base suits

It suits a garage with a genuinely awkward route, where a fixed-caster layout would make you pivot in a wide arc every time. Heavy machines and tight corners are where its four swivel wheels pay off.

When to choose something else

Look at a lighter base for portable saws and for anyone who will reposition the frame often by hand. At 44.7 lb it is a two-person install and a planned location rather than a piece of shop furniture.

10. KASTFORCE KF2005 Corner Base Kit — Budget Corner Hardware That Holds Up

BUDGET PICK

KF2005 Universal Mobile Base Heavy-Duty 500Lbs (226Kg) Load Capacity 6″ (150mm) Corners

★★★★★★★★★★4.6

• 500 lb capacity
• 6 inch corners
• 3 inch plastic wheels

Check Latest Price

Pros

• Comparable hardware quality to premium kits
• Heavy welds and a smooth uniform coating
• Foot-actuated lifts work with no reported failures
• No sag or flex once assembled
• Build takes about 20 minutes

Cons

• You must supply and cut your own plywood top
• Instructions have blurry images and a confusing swivel bracket
• Recommended drill bit size is too large
• Hard plastic wheels roll poorly on rough floors
• Corners protrude so the plywood top must be cut oversized

We earn a commission, at no additional cost to you. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

The metalwork is the story here. Owners of multiple mobile bases rate this corner kit alongside premium-brand hardware, and the box weight itself is a quality signal for people who have handled thin frames before. Welds come described as heavy, edges smooth, coating even.

It carries a 500 lb rating on 6 inch alloy steel corners with locking foot levers, and it adds less than an inch of machine height. That low profile keeps the center of gravity where it was, which is the same argument the BORA PM-2500 makes.

Reported applications run from a 14 inch bandsaw and a chop saw stand to a heavy 10 inch industrial table saw, and the foot-actuated lifts are reported to work without a single failure. Assembly takes around twenty minutes once you have the plywood cut.

Nearly every complaint points at paperwork rather than hardware. The images in the instructions are blurry, the swivel bracket orientation is easy to reverse, and the recommended drill bit size is larger than necessary, leaving a sloppy fit in the top.

Who this kit suits

It suits a sharp DIYer who wants premium-grade corner hardware without a premium brand badge, and anyone comfortable building a plywood top. Twenty minutes of assembly is the fastest build-to-base path here.

When to choose something else

Choose a factory frame if you want no cutting and no drilling. The protruding corners also mean the plywood top has to be cut oversized so the saw feet land on metal rather than overhang, which takes a bit of care.

How to Choose a Table Saw Mobile Base for Your Garage Shop

Five decisions matter more than any spec line: total loaded weight, measured leg footprint, caster layout, lock type, and how much floor you get back.

Work out your real loaded weight first

A saw is rarely the heaviest thing on the base. Add the rip fence, any outfeed roller section, a dust hose run and the accessories sitting in the cabinet, then compare that total to the printed rating. Owners consistently advise running at 70 to 80 percent of the published capacity rather than the full number.

Derating matters most on adjustable rail bases at full extension. When the rails are stretched to their maximum, the overlap between sections shrinks and the frame is stiffest at its weakest point. Size the base so your loaded saw sits comfortably inside the middle of the adjustment range instead of pinned at the top.

Match the capacity class to the machine

• Light duty, around 400 lb: portable jobsite saws, benchtop saws, small bandsaws, sanders and workbenches.

• Medium duty, 600 to 650 lb: contractor saws, 10 inch cast iron tops, most hybrids and midweight cabinet saws.

• Heavy duty, 1500 lb: full cabinet saws, shapers, jointers, planers and drum sanders, or one base serving several machines.

If you are undecided between classes, buy up a tier. The price difference between a 500 lb frame and a 650 lb frame is small compared with the cost of a frame that flexes under a loaded saw.

Measure before you order, in five steps

1. Measure the saw’s leg width from the outside of one leg to the outside of the other.

2. Measure leg depth front to back at the base of each leg.

3. Measure the diagonal between two opposite legs for a rough square check.

4. Compare those numbers against the base’s minimum adjustment, not just its maximum.

5. Confirm the base handles your rectangular layout, not only a square one, since contractor saws are rarely square.

Plenty of people measure only the maximum size and then discover the base collapses inward past their saw’s footprint. Check the minimum too.

Choose casters for the floor and the aisle

• Two fixed plus two swivel: tracks straight and resists pivoting. Best for straight runs across a bay, less nimble in tight corners.

• Four swivel: pivots in a much tighter arc. Better for awkward doorways, corners and L-shaped garages.

• 8 inch rubber jobsite wheels: roll quietly over cords, sawdust ridges and debris on uncoated concrete. Found on folding stands rather than rigid bases.

Wheel material matters as much as size. Ball bearing casters glide smoothly under load. Hard plastic casters are fine on a flat sealed slab and noticeably worse on a rough one, where they judder and can let a loaded saw drift.

Prefer locks that lift the wheels off the floor

Foot-operated levers that raise the caster off the ground remove any possibility of creep during a cut. Pedal brakes at the wheel are the next best thing. A cam that merely clamps a lever against a bracket is the least convincing, and it is what tends to loosen over time.

Metal levers beat plastic cams across the board. If two bases are otherwise equal, pick the one with machined metal or aluminum hardware.

Add up the added height

Low profile bases add about one inch under the saw. Taller frames add closer to five. That difference determines whether your blade height settings, fence position and outfeed alignment survive the conversion, so measure your vertical clearance before choosing.

Rolling to the driveway is another height question. Roughly half an inch of ground clearance under some corner kits is fine on a flat slab and a problem on a ramped or sloped surface, so check the frame before committing to regular outdoor cuts.

Mobile Base vs Folding Rolling Stand vs Fixed Cabinet

A mobile base is not always the right answer, and the honest comparison matters more than the recommendation.

Mobile base — best when you own one stationary saw and want it to leave the bay between projects. Universal bases adjust to many machines and last a lifetime, but the saw still stands in the middle of the floor when you work, and you still need to get it onto the base.

Folding rolling stand — best when floor space is extremely tight or you move between a garage and a jobsite. It folds flat against a wall in seconds and rides on large wheels. The trade-off is lower capacity and slightly more movement under load.

Saw-specific rolling stand — best for a portable saw you already own, since it bolts to that machine and nothing else. Fastest assembly and a light frame, but it becomes dead weight the day you change saws.

Fixed cabinet install — best when you have dedicated shop space and never need the floor back. It is the most stable and rigid option available, and the only one that costs you nothing in floor space management because the footprint is permanent by design.

Our rule of thumb: if the bay is shared with a car, you want a mobile base. If the saw travels to job sites, you want a folding stand. If the shop is dedicated and stability is everything, install it permanently.

How to Get a Heavy Table Saw Onto Its Mobile Base

This is the question that comes up most often in garage woodworking forums, and it is worth planning before the base arrives.

Method one: two people and a furniture dolly. Jack the saw legs onto a loaded furniture dolly, roll it onto the base deck, then lower it onto the corner brackets. This is the standard approach for saws in the 300 to 400 lb range and needs no special equipment.

Method two: engine hoist. A shop hoist or a rated come-along over a garage door track lets you lift the saw body while a second person guides the legs onto the brackets. Best for cabinet saws and anything with a high center of gravity.

Method three: ramp and casters. Build a low ramp from 3/4 inch plywood, roll the saw onto the base on its own wheels while one person controls the descent, then drive the saw legs into the corner brackets. Do this on level ground with the base already locked in position.

Method four: remove the stand. If your saw has separate legs or a folding stand, take the top off, carry the top over on its own handle or with two people, and set the legs onto the base first. This is the cleanest option for portable saws and takes the least floor space.

Whichever method you use, lock the base before you release the saw, and never work under a saw supported by a dolly or a ramp.

Garage Bay and Doorway Measurement Checklist

The garage modifier is what separates a useful mobile base guide from a generic one, so it is worth five minutes of measuring.

1. Bay width and depth: measure the usable floor with the car door open. The saw footprint is only part of the requirement.

2. Outfeed swing clearance: a contractor saw with a folding outfeed needs room to the rear or side. Measure with the outfeed deployed, not folded.

3. Narrowest point on the route: the garage door opening, the interior door to the shop and any hallway corner. Measure the diagonal of the saw plus the base at its deployed size.

4. Threshold height: check the garage door track and any saddle or ramp you cross. Low clearance under corner kits can stop a loaded saw dead.

5. Base footprint when parked: if the base does not fold or telescope, that square is yours permanently even when the saw is away.

6. Floor condition: note the slope, any settled area and whether the slab is sealed. Unsealed concrete is where small hard casters start to judder.

If step three fails, the answer is a folding stand or a base with a smaller deployed footprint, not a smaller saw. Measure the route before you pick the base.

Frequently Asked Questions

Which Table Saw Mobile Base Should You Buy in 2026?

For most garage shops, the BORA PM-1100 kit on a self-built plywood deck is the best table saw mobile base you can buy. It is adaptable enough to follow you to the next machine, its metal quick-lock levers are the ones owners keep coming back to, and it hands your bay back every time the work stops.

Pick the WEN MB500 if you want a complete factory frame today with casters and brakes already fitted. Pick the BORA PM-2500 if wall clearance is tight and you cannot give up an inch of blade height. If you own a cast iron cabinet saw or a shaper, the BORA PM-3500 is built for that weight, and the VEVOR GZB88095 is the alternative when your route through the garage is full of tight corners.

Measure your saw, measure your route, and make sure the locks lift the wheels clear of the floor. Those three checks will keep you out of the wrong base for good.